Acer Computer Monitor AL1516W User Manual

TABLE OF CONTENTS  
Special notes on LCD monitors ................................................................. 1  
Introduction ................................................................................................ 2  
Features ..................................................................................................... 2  
Unpacking .................................................................................................. 3  
Attaching/Removing the base .................................................................... 4  
Screen position adjustment ......................................................................... 4  
Connecting the power cord ........................................................................ 5  
Safety precaution ....................................................................................... 5  
Cleaning your monitor ................................................................................ 5  
Preset modes ............................................................................................. 6  
Power saving ............................................................................................. 7  
DDC .......................................................................................................... 7  
Installation .................................................................................................. 8  
User controls.............................................................................................. 9  
Troubleshooting .........................................................................................13  
Specification ..............................................................................................15  
For more information and help in recycling, please visit the following websites:  
AL1516W  
INTRODUCTION  
CCongratulations for purchasing modelAL1516W , a high performance 15-inch color TFT  
LCD monitor. The AL1516W monitor provides flicker-free and color images at optional  
resolutions. Through this user guide, we will introduce you step-by-step all the features,  
functions and technical specifications of the LCD monitor. Surely you will have a refreshing  
experience working with the monitor.  
FEATURES  
TheAL1516W is a 15-inch TFT LCD monitor that is intelligent, microprocessor-based and  
ergonomically designed display, compatible with most analog RGB (Red, Green, Blue) and  
Digital display standards, including PS/V, PS/2, optional for Apple Macintosh Centris,  
Quadra, and Macintosh II family signals. The LCD monitor is capable of displaying crisp  
and vibrant color graphics with VGA, SVGA, XGA, WXGA and most Macintosh compatible  
color video cards.  
·
The monitor is able to properly function even in case of upgrade video cards or  
software because of the wide auto-scanning compatibility range without requiring to  
buy a new monitor.  
·
The internal microprocessor digitally controls auto-scanning. For horizontal scan  
frequencies between 30 KHz and 81 KHz, and vertical scan frequencies between 55 Hz  
and 76 Hz. In each frequency mode, the microprocessor-based circuitry allows the  
monitor to function at the precision-of a fixed frequency.  
·
·
·
The resident memory allows for storing factory default settings and also additional  
user adjustment parameters.  
The maximum resolution achievable is WXGA (1280 x 800), best suited for Windows  
applications  
The compact and sleek cabinet design saves lot of your desk space and makes your  
desk look neat and tidy.  
EN-2  
AL1516W  
UNPACKING  
Please check the following items are present when you unpack the box, and save the  
packing materials in case you will need to ship or transport the monitor in future.  
LCD Monitor  
AC Power Cord  
DVI Cable  
D-SUB Cable  
(Only Dual-Input Model)  
User Manual  
Quick Start Guide  
AL1516W LCD Monitor  
EN-3  
AL1516W  
Attaching / Removing the Base  
Install:  
Remove:  
Align the four hooks on the bottom of  
the monitor with the corresponding  
slots on the bottom of the base.  
Depress the four hooks as indicated first  
before removing the base and follow the  
arrow direction to remove it.  
SCREEN POSITION ADJUSTMENT  
In oder to optimize the best viewing position, you can adjust the tilt of the monitor by  
using both of your hands to hold the edges of the monitor as shown in the figure below.  
The monitor can be adjusted to 15 degrees up or 5 degrees down as indicated by arrow  
below.  
EN-4  
AL1516W  
CONNECTING THE POWER CORD  
Check first to make sure that the power cord you use is the correct type required for  
your area.  
This monitor has a universal power supply that allows operation in either 100/120V  
AC or 220/240 VAC voltage area. No user-adjustment is required.  
Plug one end of the power cord to the AC Inlet, plug another end to a proper AC  
outlet.  
For unit using at 120 VAC:  
Use a UL Listed Cord Set, Type SVT wire and plug rated 10A/125 V.  
For unit using at 220/240 VAC (outside of U.S.):  
Use a Cord Set consisting of H05VV-F cord and plug rated 10A, 250 V. The cord set  
should have the appropriate safety approvals for the country in which the equipment  
will be installed.  
SAFETY PRECAUTION  
Avoid placing the monitor, or any other heavy object, on the power cord to avoid  
damage to the cable.  
Do not expose the monitor to rain, excessive moisture, or dust.  
Do not cover the ventilation slots or openings of the monitor. Always put the monitor  
in a place where there is adequate ventilation.  
Avoid placing the monitor against a bright background or where sunlight or other  
light sources may reflect on the face of the monitor. Place the monitor just below  
eye level.  
Handle with care when transporting the monitor.  
Refrain from giving shock or scratch to the screen, as screen is fragile.  
LAMP Disposal  
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE  
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL  
LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES  
ALLIANCEATWWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL  
INFORMATION CHECK WWW.LAMPRECYCLE.ORG.  
CLEANING YOUR MONITOR  
Please carefully follow the below guidelines when cleaning the monitor.  
Always unplug the monitor before cleaning.  
Use a soft cloth to wipe the screen and cabinet front and sides.  
EN-5  
AL1516W  
PRESET MODES  
To reduce the need for adjustment for different modes, the monitor has default setting  
modes that are most commonly used as given in the table below. For optimum adjustment,  
the user is suggested to perform the Auto Setup under Windows “Full Screen” pattern or  
using the pattern in the floppy disk provided. When none of the mode is matched, the user  
can store their preferred modes in the user modes. The monitor is capable of storing up to  
9 user modes. The only condition to store as a user mode is the new display information  
must have 1 KHz difference for horizontal frequency or 1 Hz for vertical frequency or the  
sync signal polarities are different from the default modes.  
Polarity  
H. Freq.  
(KHz)  
Band Width  
(MHz)  
Mode  
Resolution  
H
-
V
+
-
1
2
3
4
5
6
7
8
VGA  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1280 x 800  
70.1 Hz  
59.94 Hz  
31.47  
31.47  
37.5  
28.33  
25.18  
31.5  
40  
VGA  
-
VESA  
VESA  
VESA  
VESA  
VESA  
CVT-RB  
75  
Hz  
-
-
60.3 Hz  
37.88  
46.88  
48.36  
60.02  
49.31  
+
+
-
+
+
-
75  
60  
75  
60  
Hz  
Hz  
Hz  
Hz  
49.5  
65  
78.75  
71  
+
+
+
-
EN-6  
AL1516W  
POWER SAVING  
The monitor will be driven into “Power Saving” mode by the control  
display controller, as indicated by the amber-color power LED.  
signal from the  
Power  
Consumption  
State  
LED Light  
ON  
Normal  
Green  
Power Saving Mode  
<2 W  
Amber  
The power saving states will be kept until a control signal has been detected or the  
keyboard or mouse is activated. The recovery time fromActive OFF state back to ON state  
is around 5 seconds.  
DDC  
To make your installation easier, the monitor is able to Plug and Play with your system if  
your system also supports DDC protocol. The DDC (Display Data Channel) is a  
communication protocol through which the monitor automatically informs the host system  
about its capabilities, for example, supported resolutions and corresponding timing. The  
monitor supports DDC2B standard.  
EN-7  
AL1516W  
INSTALLATION  
To install the monitor to your host system, please follow the steps as given below:  
Steps  
1. 1-1 Connect Video Cable  
a. Make sure both the monitor and computer are powered-OFF.  
b. Connect the VGA video cable to the computer.  
1-2 Digital Cable (Only Dual-Input Model)  
a. Make sure both the monitor and computer are powered-OFF.  
b. Connect one end of the 24-pin DVI cable to the back of the monitor and  
connect the other end to the computer’s port.  
2. Connect power cord  
Connect the power cord to the monitor, then to a properly grounded AC outlet.  
3. Power-ON Monitor and Computer  
Power-ON the monitor first, then power-ON the computer.  
This sequence is very important.  
4. If the monitor still does not function properly, please refer to the troubleshooting section  
to diagnose the problem.  
Please don’t open the cover  
EN-8  
AL1516W  
USER CONTROLS  
2
3
1
4
4
5
Front Panel Controls  
1. Power Switch:  
To turn ON or OFF the power.  
2. Power LED:  
Lights up to indicate the power is turned ON.  
3. Empowering / Exit:  
1) When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).  
2) When OSD menu is in off status, press this button to select scenario mode.  
4. < / >  
Press < or > to select the desired function.  
Press < or > to change the settings of the current function.  
5. MENU / ENTER:  
Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when  
OSD is ON .  
EN-9  
AL1516W  
HOW TO ADJUST A SETTING  
1. Press the MENU-button to activate the OSD window.  
2. Press < or > to select the desired function.  
3. Press the MENU-button to select the function that you want to adjust.  
4. Press < or > to change the settings of the current function.  
5. To exit and save, select the exit function. If you want to adjust any other function,  
repeat steps 2-4.  
I. Analog Signal Input  
II. Digital Signal Input  
ADJUSTING THE PICTURE  
The descriptions for function control LEDS  
Main  
Menu  
Icon  
Sub  
Menu  
Icon  
Sub  
Menu  
Item  
Description  
Adjusts the contrast between the foreground and  
background of the screen image.  
Contrast  
Brightness  
Focus  
Adjusts the background brightness of the screen  
image.  
Adjusts picture Focus.  
(available in Analog mode only)  
Adjusts picture Clock.  
(available in Analog mode only)  
Clock  
EN-10  
AL1516W  
Main  
Menu  
Icon  
Sub  
Menu  
Icon  
Sub Menu Item  
Description  
Adjust the horizontal position.  
(available in Analog mode only)  
H. Position  
V. Position  
Adjust the vertical position.  
(available in Analog mode only)  
N/A  
Warm  
Cool  
Set the color temperature to warm white.  
Set the color temperature to cool white.  
N/A  
User /Red  
User/Green  
Adjusts Red/Green/Blue intensity.  
User/Blue  
English  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Deutsch  
Francais  
Espanol  
Italiano  
Multi-language selection.  
EN-11  
AL1516W  
Main  
Menu  
Icon  
Sub  
Menu  
Icon  
Sub Menu Item  
Description  
H. Position  
V. Position  
Adjust the horizontal position of the OSD.  
Adjust the vertical position of the OSD.  
OSD Timeout  
Analog  
Adjust the OSD timeout.  
N/A  
Select input signal from analog (D-Sub)  
N/A  
N/A  
Digital  
Select input signal from digital (DVI)  
Turn ON/OFF DDC/CI support  
DDC/CI  
Show the resolution, H/V frequency and  
input port of current input timing.  
N/A  
N/A  
N/A  
Information  
Reset  
Clear each old status of Auto-configuration  
and set the color temperature to Cool.  
Exit  
Save user adjustment and OSD disappear.  
EN-12  
AL1516W  
TROUBLESHOOTING  
Before sending your LCD monitor for servicing, please check the troubleshooting list  
below to see if you can self-diagnose the problem.  
(VGA Mode)  
Problems Current Status  
Remedy  
LED ON  
Using OSD, adjust brightness and contrast to  
maximum or reset to their default settings.  
LED OFF  
Check the power switch.  
No  
Picture  
Check if AC power cord is properly connected  
to the monitor.  
LED displays  
amber color  
Check if video signal cable is properly  
connected at the back of monitor.  
Check if the power of computer system is ON.  
Unstable Picture  
Check if the specification of graphics adapter  
and monitor is in compliance which may be  
causing the input signal frequency mismatch.  
Display is missing,  
center shift, or too  
small or too large  
Using OSD, adjust RESOLUTION, CLOCK,  
CLOCK-PHASE, H-POSITION and V-  
POSITION with non-standard signals.  
Abnormal  
in display size  
Picture  
Using OSD, in case of missing full-screen image,  
please select other resolution or other vertical  
refresh timing.  
Wait for a few seconds after adjusting the size of  
the image before changing or disconnecting the  
signal cable or powering OFF the monitor.  
EN-13  
AL1516W  
(DVI Mode)  
Problems Current Status  
Remedy  
LED ON  
Using OSD, adjust brightness and contrast to  
maximum or reset to their default settings.  
LED OFF  
Check the power switch.  
No  
Picture  
Check if AC power cord is properly connected  
to the monitor.  
LED displays  
amber color  
Check if video signal cable is properly  
connected at the back of monitor.  
Check if the power of computer system is ON.  
EN-14  
AL1516W  
SPECIFICATION  
Driving system  
Size  
TFT Color LCD  
15.4" wide  
Pixel pitch  
Brightness  
Contrast  
0.258mm( H )x 0.258mm( V )  
220cd/m2 (Typical)  
300:1 (Typical)  
LCD Panel  
Viewable angle  
Response time  
Video  
900 (H) 450 (V)  
8 ms (Typical)  
R,G,B Analog Interface  
30KHz - 81KHz  
55-76Hz  
H-Frequency  
V-Frequency  
Display Colors  
Dot Clock  
16.2M Colors  
83.5MHz  
Max. Resolution  
Plug & Play  
1280 x 800 @60Hz  
VESA DDC CI/DDC2B  
<20W  
ON Mode  
OFF Mode  
EPA ENERGY STAR  
Input Connector  
< 1W  
D-Sub  
DVI-D 24pin (Only Dual-Input Model)  
Analog:0.7Vp-p(standard),  
75 OHM, Positive  
Input Video Signal  
Digital signal (Only Dual-Input Model)  
Horizontal : 331.2 mm  
Vertical : 207 mm  
Maximum Screen Size  
Power Source  
100-240VAC, 50/60Hz, 0.5A  
EN-15  
AL1516W  
Operating Temp: 50 to 350C  
Storage Temp.: -200 to 600C  
Operating Humidity: 10% to 85%  
Environmental Considerations  
Dimensions  
368.4(W) x 314(H) x 158.9(D)mm  
2.71kg Unit (net)  
Weight (N. W.)  
Empowering / Exit  
< / >  
Power Button  
MENU/ ENTER  
Switch  
Contrast  
Brightness  
Focus  
Clock  
H.Position  
V.Position  
Language  
External Controls:  
Auto configuration (only Analog input model)  
Input signal Selection (only Dual input model)  
Functions  
(Warm) Color  
(Cool) Color  
RGB Color temperature  
Reset  
OSD position . timeout  
Display information  
Exit  
Power Consumption ( Maximum )  
30 Watts  
CUL, FCC, CE, C-TICK  
Regulatory Compliance  
* All specifications are subject to change without notice.  
EN-16  

Frigidaire FGGC3065KS User Manual
Eizo Nanao Computer Monitor TP1 User Manual
Dell Monitor 391 10025 User Manual
Dell Computer Monitor E190S User Manual
Daewoo DTQ 20V4SCN User Manual
Cypress CY7C1512KV18 User Manual
Creda C361E User Manual
AT T DECT CL82609 User Manual
Asus AT5IONT I DELUXE User Manual
AOC Computer Monitor E2041S User Manual