MULTI PJ CAMERA
Using the Multi PJ Startup Mode (2)
When
case
closed
YC-430
This guide provides simplified information about how to use the functions of
the CASIO YC-430 MULTI PJ CAMERA. For details, see the user’s guide that
comes with the YC-430.
Camera Image Mode: To project images recorded with the PJ Camera
Camera Image
Quick Guide
After recording the images with the PJ Camera, attach
the camera to the stand.
Double-click the thumbnail of the
image you want to project.
1
Preview list area (Thumbnails of images
stored in PJ Camera memory)
1
Installing the Bundled Software
Install the bundled software
on your computer.
2
1
Click [Camera Image]
This will display thumbnails of the image files in PJ Camera memory
.
*
After restarting your computer, check to make
sure the PJ Camera Software icon is in your
Windows taskbar.
Refer to “Using the CASIO CD-ROM” in
the YC-430 User’s Guide for details.
Playlist area
(Projection sequence of images)
Unfold these parts until
you hear them click into
place.
Setting Up the Multi PJ Camera System
1. Prepare the YC-430 stand.
2
Refer to Chapter 2 of the PJ Camera Software User’s Guide.
Other Functions
PC Image Mode
Preview list area (Thumbnails of images on
your computer)
You can select images from thumbnails of images on your computer and project the
images. You also can use the “Playlist” to arrange the sequence of the images for a
presentation.
Install batteries in the PJ Camera
and then attach it to the bracket.
You also can remove
the PJ Camera from
the stand and use it as
a digital camera.
2. Attach the PJ Camera to the camera stand.
Press the PJ Camera
against the camera
bracket until it clicks
securely into place.
Playlist area
(Projection sequence of images)
Use a coin or other
object to tighten.
Refer to “Setting Up the Multi PJ Camera System”
in the YC-430 User’s Guide for more information.
Refer to Chapter 2 of the PJ Camera Software User’s Guide.
Connect the YC-430, projector, and computer.
Use the A-B USB cable that comes with the YC-430 system to connect to
your computer.
Projector
Cables and
Connections
Board Area Capture/Projection Area Capture
3
After you project an image onto a whiteboard and add handwritten notes with a marker, you can record the image along with the
handwritten notes to a new image. Whether you should use “Board Area Capture” or “Projection Area Capture” depends on the area of
data you want to include in the image.
*
Be sure to connect only the bundled AC adaptor to the PJ Camera
Stand.
Depending on the area of data you want to include in the image, click
.
1
A-B USB cable
RGB cable
*
Note that the YC-430 does
not come with an RGB cable.
Computer
Image projected from the projector
Refer to “Setting Up the Multi PJ Camera System” in the YC-430 User’s Guide for more information.
Projection Area Capture
Turn on stand power will start up the PJ Camera
Software and display a dialog box.
Starting Up the Software
4
Records the area within the projected image.
*
All system operations are performed using the PJ Camera Software.
Position and focus adjustment
are performed automatically.
Make sure there is nothing on
the document stage.
Dialog Box
Business Document startup mode:
Select this mode to configure the camera as a
document camera, which will simplify shooting of
documents and three-dimensional objects.
Board Area Capture
Records the entire whiteboard area.
Multi PJ startup mode:
Select the startup mode
you want to use.
Select this mode to enable the full range of camera
functions, including document camera, scanner,
board area capture, and other functions.
Refer to Chapter 2 of the PJ Camera Software User’s Guide.
Refer to “PJ Camera Software Overview and Basic Operations” in the YC-430 User’s Guide.
RJA518150-002
MA0705-000501A Printed in Japan
|